Temperature plot empty: Difference between revisions

Revision as of 10:42, 16 April 2018

high-resolution terminology - matching measurements at high-resolution

Temperature plot empty

Description

Problem: Layout "01 Calibration Exp. Gr3-Temp" is selected, a third plot is displayed on the screen but it remains empty (no plot is shown). Newer versions of DatLab include pre-installed layouts which do not recognize some channel designations from older O2k series.

Reference: MitoPedia: DatLab

MitoPedia O2k and high-resolution respirometry: DatLab

MitoPedia O2k and high-resolution respirometry: O2k-Open Support

Action

The problem of an empty graph can be solved by selecting the approbate channels manually and then save the modified layout:

Select layout "01 Calibration show Temp".
Select the third, empty graph at the bottom by clicking on it.
In the menu go to "Graph" / "Select plots" and manually check "Block temp." and "Peltier pow." for the Y1 and Y2 axis, respectively.
Select a line color and thickness for both plots.
Save the graph layout, replacing "01 Calibration show Temp".

@@ Line 1: / Line 1: @@
 {{MitoPedia
 |description='''Problem:''' Layout "01 Calibration Exp. Gr3-Temp" is selected, a third plot is displayed on the screen but it remains empty (no plot is shown). Newer versions of [[DatLab]] include pre-installed layouts which do not recognize some channel designations from older O2k series.
-|info=[[MiPNet19.18C DatLab 6: Guide]]
+|info=[[MitoPedia: DatLab]]
 }}
 {{MitoPedia O2k and high-resolution respirometry